evertz VIP-X - SNMP Configuration; UMD Setup

VIP-X System Manual
VIP-X - 48 Revision 1.0
9.2.3. SNMP Configuration
3) SNMP Configuration – This menu option is used to set the TRAP destination IP address, which
originates at this VIP (if enabled).
------------------------------------------
No Trap Destinations Assigned
------------------------------------------
(1) Set Trap IP Address
(2) Remove Trap IP Address
(3) Community Strings
(S) Save and Exit
(X) Exit
> $
9.2.4. UMD Setup
4) UMD Setup – Set the dynamic UMD.
The UMD Setup is as follows:
Protocol: Image Video
Input Type: Serial
------------------------------------------------
(1) Set protocol
(S) Save and exit
(X) Exit without saving
Select UMD Protocol: (1 - 3)
1. Image Video
2. Philips ASCII
3. XY Integrator
4. TSL 3.1
5. Echo
6. TSL 4.0
7. Harris Image Video
Select Input Type: (1 - 2) – Option for Image Video Protocol only
1. Serial
2. Network