VIP-X System Manual
Revision 1.0 VIP-X - 37
6.2. 7767VIPX16X2 SPECIFICATIONS
X-LINK enabled VIP Advanced display processor module supports up to sixteen video inputs
distributed from router via “X-LINK” interconnect. The 7767VIPX16x2 supports up to two unique multi-
image display outputs via DVI and HD-SDI. Each DVI output can have an independent resolution.
Resolutions range from XGA (1024x768) to WUXGA (1920x1200).
7767VIPX modules are installed in Evertz 7700FR-D frame, which uses high output power supplies.
Up to 4 modules or two pairs of 7767VIPX16x2 cards can be installed in a single 7700FR-D frame.
Each 7767VIPX16x2 occupies half of the 7767VIPX-RP2 rear plate; up to two 7767VIPX16x2 modules
are supported by a single 7767VIPX-RP2 rear plate.
Each 7767VIPX16x2 display module accepts up to 16 sources from the router via X-LINK and can view
any source on both of its display outputs. A single source can be viewed multiple times on either
display. A single source can be replicated up to 120 times across the two displays.
6.2.1. Serial Video Inputs
Standard: 3Gbps (SMPTE 424M), and/or
HD-SDI (SMPTE 292M),
SD-SDI (SMPTE 259M-C)
Number of Inputs: 16
Connector: X-LINK (Evertz proprietary)
Equalization: Automatic to 100m (Belden 1694A)
Return Loss: > 15dB up to 270Mb/s
Embedded Audio: SMPTE 272M-A
6.2.2. Background (Computer) Video Input
Standard: GLINK (Evertz proprietary) requires video to GLINK formatter
Number of Inputs: 1
Connector: BNC per IEC 60169-8 Amendment 2
Input Resolution: 640x480 (VGA) to 1600x1200 (UXGA)
Input Impedance: 75Ω
6.2.3. Display Video Output
Standard: VESA (DVI-D) up to WUXGA (1920x1200)
Number of Outputs: 2
Connector: DVI-I
Video: 1V p-p RGB, 60/50 Hz refresh
Impedance: 50Ω
6.2.4. Serial Video Output
Standard: Selectable HD/SD serial monitoring output (720p, 1080i, 625i, 525i)
Number of Outputs: 2
Connector: BNC per IEC 60169-8 Amendment 2
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Rise and Fall Time: 200ps nominal (HD), 740ps nominal (SD)
Overshoot: < 10% of amplitude