evertz VIP-X - Figure 11-3: Auxiliary Serial Port Settings; Figure 11-4: under Monitor Display Setup Settings

VIP-X System Manual
Revision 1.0 VIP-X - 65
Ensure the settings match those listed below:
Figure 11-3: Auxiliary Serial Port Settings
5. Select (4) Under Monitor Display Setup from the main menu to set up the display card for TSL
protocol operation.
Ensure the settings match those listed below:
Figure 11-4: Under Monitor Display Setup Settings
------------------------------------------------
| Auxiliary Serial Port Setup |
| (7767VIPX8x2 1.0.0) |
------------------------------------------------
------------------------------------------------
Baud Rate: 38400
Data Bits: 8
Parity: even
Stop Bits: 1
------------------------------------------------
(1) Set baud rate
(2) Set number of data bits
(3) Set parity
(4) Set number of stop bits
(S) Save and Exit
(X) Exit
------------------------------------------------
| Under Monitor Display Setup |
| (3000PPV v1.06 b1248) |
------------------------------------------------
------------------------------------------------
Protocol: TSL
Input Type: serial
------------------------------------------------
(1) Set protocol
(S) Save and Exit
(X) Exit
>