VIP-X System Manual
Revision 1.0 VIP-X - 71
6. Wire the serial connection from the router/switcher to the auxiliary serial port of the VIPX.
7. Power-cycle the VIPX frame.
8. Using Maestro, add a UMD to a video object by dragging and dropping it onto the video object.
9. Navigate to Mode Settings > Mode > Function, and select Protocol ID from the drop-down box.
10. Set the Active Protocol ID to match the video mapping defined by the router/switcher.
When the VIPX receives a command from the router/switcher it will now be displayed on the output
display.
To Next Page
Loading...
