05-2019 0073 00 65
NEtwork
The Ethernet and Wi-Fi congurations
vary according to the network to which you
would like to connect the appliance and the
adopted network protections.
-
-
the appliance will be connected.
The appliance supports the TCP/IP proto-
col.
Ethernet and Wi-Fi connections cannot
be enabled at the same time.
The conguration of the mobile network
data connection varies according to the
chosen telephone service provider.
Contact your chosen telephone ser-
vice provider for the suitable parame-
ters for data connection.
EtHErNEt
Enable the Ethernet connection to cong-
ure the appliance to the LAN network.
The network parameters (such as the IP
address, etc.) can either be automatically
(DHCP to ON) or manually (DHCP to OFF)
set.
-
rameters, there must be a DHCP server
If you choose to manually set the parame-
ters, the following must be entered:
-The IP address that you want to assign to
the appliance;
-The subnet mask to which the IP address
belongs;
-The gateway (router) IP address;
-The IP address of the resolving name
server (DNS server).
If an error is made when manually
entering the parameters or an IP ad-
dress that is already in use on the LAN
You can check if the network connection is
working from this function.
The MAC address is a unique address
assigned by the manufacturer that identies
the appliance’s network card.
The MAC address cannot be changed.
To Next Page
