Test Setup - Test Configurator, Timer, and System
128 MAX-800 Series
MAC/IP/UDP
Global IPv6 Address (GUA) is used to communicate with on-link
neighbors and for global communication with hosts outside the
subnet.
Mode
None disables the Global IPv6 Address and the Default Gateway
Address.
Stateless Auto (default) allows automatic generation of the IPv6
address based on the Link-Local address interface ID and the
prefix obtained from the router advertisements. If no Interface ID
has been obtained for the Link Local Address, the global address
will not be generated.
Static allows entering the IP address.
Address, available with Static mode, allows selecting the Global
IPv6 Address. The accepted range is from
0000:0000:0000:0000::[Interface ID] to
FFFF:FFFF:FFFF:FFFF::[Interface ID]. The default address is
2001:0000:0000:0000::[Interface ID], where [Interface ID] is
generated from the source MAC address. When the Address field
is selected for editing using virtual keyboard, the Previous IPs
button appears allowing the selection of a previously configured IP
address.
Interface ID Coupled, available when the Source Global IPv6
Address mode is Static, allows coupling the interface ID of the
Global address to the Link-Local source address.
Enabled (default): Only the 64 bit (MSB) prefix ID in the IPv6
address is configurable, and the 64 bit (LSB) Interface ID is not
configurable (read-only).
Disabled: The 64 bit (MSB) Prefix ID and 64 bit (LSB) Interface ID
in the IPv6 address are configurable.
To Next Page
Loading...
