EXFO MAX-890 - Page 137

Test Setup - Test Configurator, Timer, and System
MaxTester 129
MAC/IP/UDP
 Prefix Mask, available with Static mode, allows specifying a prefix
that defines the subnet. The accepted range is
0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:0000:0000:0000:0000. For example:
Global Address: 2001:0DB8:0001:0002:02AA:00FF:FE11:1111
Prefix Mask: FFFF:FFFF:FFFF:0000:0000:0000:0000:0000
Corresponding Prefix: 2001:0DB8:0001.
 Default Gateway allows the configuration of the default gateway
address to forward packets outside the subnet.
 Mode
Automatic (default) allows automatic selection of the default
gateway.
Static allows entering the default gateway IP address.
 Address, available with Static mode, allows entering the IP
address of the Default Gateway. The accepted range is from
0000:0000:0000:0000:0000:0000:0000:0000 to
FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address
is FE80:0000:0000:0000:0000:0000:0000:0000.
 IPv6 Destination Address allows selecting the destination IP address
for the stream that must start with FE80. The accepted range is from
0000:0000:0000:0000:0000:0000:0000:0001 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF. The default address is
2001::. When the Address field is selected for editing using virtual
keyboard, the Previous IPs button appears allowing the selection of a
previously configured IP address.