Extron electronics DTP CrossPoint 4K Series - Page 122

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 114
Mic-to-output mixer block (see figure 53 on page 97,
H
)
Virtual returns-to-output mixer block (
I
)
Expansion inputs-to-output mixer block (
J
)
These three mixer blocks (see figure 59) are an array of points where mic, virtual bus, and
expansion bus audio can be further mixed into the left and right audio output channels. The
block provides a way to unmute and mute the inputs from the mic/line input, virtual bus,
or expansion bus signal processor chains. The mix-points are muted by default. Unmuting
effectively mixes the inputs into the audio outputs at the level set in the mix controls.
Mic-to-output
Mixer
}
Virtual returns-to-output
Mixer
Expansion inputs-to-output
Mixer
Switcher-to-output Mixer
1111111111
11
11111111
33
33333333
33
33333333
44
44444444
22
22222222
33
33333333
44
44444444
22
22222222
44
44444444
22
22222222
55
55555555
11
11111111
Figure 59. Output Mixer Blocks and Mix-points, DTP CrossPoint 108 4K Shown