DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 113
Simplified mixer signal flow
}}}}
}}
}
}
= Mute
LineMic/LineVirtual ReturnsExpansion Inputs
Figure 58. Simplified Mixer Signal Flow, DTP CrossPoint 108 4K Shown
• Mix-point mutes (indicated by in figure 58, a graphic representation of the mixer) do
not block the horizontal signal flow. Unless muted before the mixer, audio always flows
from left to right through the mixer.
• Mix-point unmutes ( ) redirect the audio vertically without disrupting the horizontal
signal flow. In the first block (column) of mix-points, audio is redirected up. In the
second column, audio is redirected down.
• The virtual send bus does not exit the DSP, but is looped around for potential additional
processing.