Extron electronics DTP CrossPoint 4K Series - Page 146

DTP CrossPoint 4K Series Matrix Switchers • Matrix Software 138
Adding a building block
Custom building blocks can be created if necessary, such as when a new mic is connected
to an input. The signal path can be configured for that specific mic and then saved as a new
building block as follows:
1. Modify the processing chain for an input or output. In this example, a custom mic
configuration has been created for mic 2.
2. Open the Building Blocks dialog box: Click the Mic Input2 number box
(
1
). The
Building Blocks dialog box opens.
Click the number.
A Building Block dialog box opens.
1111111111
3. Add a building block: In the dialog box, select the Add Block icon ( )
(
1
).
Click the Add Block icon.
The Add a Building Block dialog box opens.
1111111111
4. Name the block: In the Name field, enter a name for the new building block
(
1
). If
desired, select a folder for the block in the Create In: drop-down menu
(
2
).
1111111111
22
22222222