Extron electronics DTP CrossPoint 4K Series - Page 44

DTP CrossPoint 4K Series Matrix Switchers • Operation 36
Example 1: Create a set of video and audio ties, 10x8 matrix
1. Clear all selections: Press and release the Esc button.
C O N T R O L
PRESET ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button blinks once.
2. Select video and audio for the tie: Press and release the Video button and the
Audio button as necessary to light both.
I / O
VIDEO AUDIO
Press the
Video button to toggle on and off.
The button lights green when selected.
Press the Audio button to toggle on and off
.
The button lights red when selected.
3. Select an input: Press and release the Input 5 button.
123 4 567 8 9 10
INPUTS
Press the button.
The button lights amber.
4. Select the outputs: Press and release the Output 1, Output 3, and Output 4 buttons.
C O N T R O L
PRESET ENTER
ESCVIEW
12345678
OUTPUTS
Press the buttons.
The buttons blink amber to indicate that the selected
video and audio inputs will be tied to these outputs.
The Enter button blinks
green to indicate the need
to confirm the change.
NOTE: You can abandon the entire set of prospective ties at this point by pressing
and releasing the Esc button. The Esc button blinks once.
5. Confirm the change: Press and release the Enter button.
ENTER
All input buttons and output buttons
return to unlit or bac
kground illumination.
Press the Enter button
to confirm the change.
The
Enter button returns to
unlit or background illumination.
The current configuration (see figure 27) is now input 5 video and audio tied to output 1,
output 3, and output 4.
Output
3
4
1
5
Video
Audio
Input
Figure 27. Final Configuration, Example 1