Extron electronics DTP CrossPoint 4K Series - Page 45

DTP CrossPoint 4K Series Matrix Switchers • Operation 37
Example 2: Add a video tie to a set of video and audio ties, 10x8 matrix
NOTE: This example assumes that you have performed example 1 on the previous
page.
1. Clear all sections: Press and release the Esc button.
2. Select video only for the tie: Press and release the Video button and the Audio
button as necessary to light Video only.
I / O
VIDEO AUDIO
Press the
Video button to toggle on and off.
The button lights green when selected.
Press the Audio button to toggle on and off.
The button is unlit or background illuminated when deselected.
3. Select an input: Press and release the Input 5 button.
123 4 567 8 9 10
INPUTS
123456
78
OUTPUTS
Press the button.
The button lights green to indicate that video
outputs can be tied to or untied from this input.
The Output 1, Output 3, and Output 4
buttons light green to indicate the video
ties created in example 1.
4. Select the output: Press and release the Output 2 button.
C O N T R O L
PRESET ENTER
ESCVIEW
12345678
OUTPUTS
Press the button.
The b
utton blinks green to indicate that only the
selected
video input will be tied to this output.
The Enter button blinks green to
indicate the need to confirm the change.
5. Confirm the change: Press and release the Enter button.
ENTER
All input buttons and output buttons
return to unlit or bac
kground illumination.
Press the Enter button
to confirm the change.
The
Enter button returns to
unlit or background illumination.
The current configuration (see figure 28) is now:
• Video — Input 5 video is tied to output 1, output 2, output 3, and output 4.
• Audio — Input 5 audio is tied to output 1, output 3, and output 4.
Input
Output
1
3
4
2
5
Video
Audio
Figure 28. Final Configuration, Example 2