Extron electronics IN1806 Series - Page 71

IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control 63
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Input Configuration (continued)
Input EDID
Specify an EDID value
E
A
X!
*
X2!
EDID
}
EdidA
X!
*
X2!]
Assign EDID
X2!
to input
X!
.
View assigned EDID
E
A
X!
EDID
} X2!]
View EDID
X2!
for input
X!
.
Save the output EDID to a
custom slot
E
S
X@
*
X2!
EDID
}
EdidS
X@
*
X2!]
Save the EDID of output
X@
to
X2!
.
NOTE: For the Save command,
X2!
can be 201 through 210 only.
View EDID native resolution
E
N
X2!
EDID
}
nnnnxnnnn•@nn.nnHz
]
Show the resolution and refresh rate of
EDID
X2!
.
Verbose modes 2 and 3:
EdidN
X2!
* nnnnxnnnn•@nn.nnHz
]
Example:
EdidN013*1280x768 @59.87Hz
]
Export EDID file
E
E
X2!
,<filename>EDID
}
EdidE
X2!]
Export EDID
X2!
to <filename>.
Import EDID file
E
I
X2!
,<filename>EDID
}
Import EDID
X2!
from <filename>.
EdidI
X2!]
NOTES:
• For the Import EDID command,
X2!
can be 10 through 210. For the Export command,
X2!
can be 201 through 210.
• <Filename> can optionally be a full path name. The EDID file format is 128 or 256 bytes of binary data with a .bin
extension.
• Exporting a default EDID (
X2!
value of 10 through 76) results in HDMI with LPCM-2Ch audio EDID being exported.
Auto-Image
Execute
1*0A
Img1*0
]
Execute an Auto-Image for the current
input (follows the current aspect ratio).
Execute and fill
1*1A
Img1*1
]
Execute an Auto-Image and fill the
output raster.
Execute and follow
1*2A
Img1*2
]
Execute an Auto-Image and maintain
the aspect ratio of the current input.
KEY:
X!
= Input selection
1 = DisplayPort input 1
2-6 = HDMI or DVI input 2, 3, 4, 5, or 6
7-8 = DTP2/XTP input 7 or 8 (IN1808 Series only)
9 = Aux audio input
X@
= Output
1 = HDMI/DVI output 1A
2 = DTP2/XTP/HDBT output 1B
3 = HDMI/DVI Loop output
X2!
= EDID emulation
See the Input EDID and Output Resolutions table on page 56.