SMP 111 • Introduction 5
Licensed Third-party Software Used in the SMP111
Package License Package License
libungif MIT util-linux GPLv2, BSD-4c, libblkid and libmount
LGPLv2.1, libuuid BSD-3c
libusb LGPLv2.1 vsftpd GPLv2
libv4l GPLv2 xinetd xinetd license
lighttpd BSD-3c zlib zlib license
General Product Overview
Input
The SMP111 has one HDMI input and one analog audio captive screw input.
Signals from the input channel and metadata (descriptive information about data content)
are combined in a user-configurable layout and encoded into streams.
Encoding and Output
The SMP111 supports simultaneous streaming and recording, with one HDMI output. The
record and stream encoder settings can be configured as different bit rates, resolutions, and
frame rates.
The HDMI output defaults to the record settings.
See the An overview of encoding on page50 for a comparison of the two encoding
types. The video output can be scaled and its aspect ratio modified. The SMP111 also
outputs high quality encoded HDMI video with embedded audio on a single output for
display on any HDMI display, supporting resolutions up to 1920x1080 at 60 Hz.
To Next Page
Loading...
Need help?
General