To Next Page

To Previous Page

SMP111 • Web-Based User Interface 61

Add a Network Share

Network servers or network-attached storage drives (network shares) can be added to the

file list so the SMP111 can access files and folders stored on shared network resources.

NOTE: The size of network shares is initially unknown and there can be significant

performance issues if the entire contents of every network share is indexed on every

filter or search request. To provide the best performance with available resources, the

searches and filtering for network shares is limited to the layer immediately below the

level that the user manually expands. If the user fully expands the share, then it is fully

indexed, searched, and filtered.

See the SMP111HelpFile to add a network share using the Web-based UI.

Upload Files To and Download Files From the SMP111 Using an SFTP Client

NOTE: Recordings can be downloaded from SFTP client but recordings "cannot" be

deleted from client

Automatic file uploading to a network location (see Setting the Default Recording Media

page 56), the recording re-transfer (re-upload) option within the Publish Settings

page satisfies most file transfer needs. However, if there is a need to transfer files into or out

of the SMP111 outside of those controls, use an SFTP client utility.

To use an SFTP client utility to transfer files:

1. Click the File Management tab.

2. Copy the URL from the Accessing Internal Filesystem panel. The

URL includes the SFTP protocol name (sftp), the address of the SMP111, and

also the logical port number (default: 22022) of the LAN port. For example,

sftp://192.168.194.28:22022.

3. Open an SFTP client program of your choice.

4. Paste the URL from the SMP111 into the host name or host address field of the SFTP

client program. If necessary, delete "sftp" from the URL and select SFTP from a different

field or menu and remove the port number from the URL and paste it into a port number

field.

5. If an administrator username and password are set for the unit, enter those in the

appropriate fields in the SFTP client.

6. Log into or connect to the SMP111.

7. Use the FTP client software to copy files (recordings, logs) to and from the internal

storage folders on the SMP111.

8. Disconnect from the SMP111 (close the SFTP session).

Extron electronics SMP 111 User Manual

Other manuals for Extron electronics SMP 111