SMP111 • Web-Based User Interface 33
The idle status does not affect the recording or the output AV streams, which continue
unaffected no matter what state (active or idle) the web pages are in.
To reconnect the web page to the live feed from the SMP111, click Resume. In a moment,
the browser refreshes the view, and the status updates and video confidence display
resume.
NOTE: If the SMP111 loses the network connection, the connection to the embedded
web pages is also lost. You may receive notice of the connection failure, but there is no
specific status indication for disconnection.
Logging Out and Logging In
Before you can change roles (from administrator to user, or user to administrator) or to
change user accounts, log out of the embedded web pages. The user or administrator
status is displayed in the upper right corner of all web pages.
The Logout button appears only if one or more passwords is active.
To log out of the web pages:
1. From any embedded web page, click the Logout
button at the upper right of the browser page.
A Logout dialog box opens.
2. Click OK to log out of the SMP111 web pages, or click Cancel to remain logged on
using the same account.
The Logout dialog closes and returns you to the embedded web pages.
NOTE:
• If you click Cancel, you remain logged in and the embedded web pages
continue to function as they did before you clicked Logout.
• If you click OK, the controls are replaced by a message confirming that you are
logged out and asking you to close the browser. Close the browser completely.
If you close only a tab within the browser, the logout process does not
complete.
• Some browsers, such as Google Chrome, include an option to continue running
in the background after closing. If this is enabled on Windows, the browser can
be exited completely using the taskbar notification icon.
To log in to an SMP111:
1. Open a Web browser.
2. Enter the IP address of the SMP into the address field and navigate to that unit. The
Authentication Required (Chrome or Firefox) or Windows Security (Internet Explorer)
login dialog box appears.
3. Enter the appropriate user or administrator user name and corresponding password
into the fields.
4. Click Log In or OK. The embedded web page opens.