SMP111 • Web-Based User Interface 67
System Resets
The System Resets page within Troubleshooting contains options to initiate a unit
reboot, delete all stored content and format the internal storage, or perform one of five
different types of reset. Some of the reset options offered here can also be performed using
SIS commands.
To open this page, click the Troubleshooting tab at the top of the embedded web
pages and then click the System Resets tab (see figure 60,
5
) on the second tier of
tabs.
1 2 3 4 5
Figure 60. Troubleshooting Tab, System Resets Subtab
The System Resets page opens to the Reset pane.
Figure 61. System Resets Page
Each option within this page includes a description of its function. To perform a reboot,
reset, or content deletion (storage reformatting), click the button for the desired option.
When a reset or reboot is performed, the unit reboots and loses its network connection.
• After a reset or reboot, it may take a few minutes for the SMP to restart and connect to
the network. Refresh the browser window to reconnect to the unit.
• For Reset IP Networking Settings and Factory Reset, all IP addresses and
network settings are reset to factory defaults. You must connect again using the default
addresses.
See the SMP111HelpFile for information about the system resets using the Web UI.
figure 60
figure 61
To Next Page
Loading...
Need help?
General