SMP111 • Reference Information 90
Reference
Information
This section provides information about:
• Mounting the SMP111
• Supported File Types, Drive Formats, and Browsers
• DataViewer
• Streaming Method Overview
• Estimating Storage Requirements for a Recording
• Glossary
Mounting the SMP111
The 1U high, half rack width, 9.5 inch deep SMP111 Streaming Media Processor can be:
• Set on a table
• Mounted on a rack shelf
• Mounted under a desk or tabletop
• Mounted on a projector bracket
See the SMP111 product page at www.extron.com for compatible mounting kits.
Tabletop Use
The SMP111 includes rubber feet (not installed). For tabletop use, attach a self‑adhesive
rubber foot to each corner on the bottom of the unit.
Furniture Mounting
Furniture mount the SMP111 using an optional under‑desk or through‑desk mounting kit.
Follow the instructions included with the mounting kit.
Table or Wall Mounting
Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above
the top surface of the SMP111 enclosure. This design allows an air space between the
mounting surface and the enclosure. Follow the instructions included with the mounting kit.
Rack Mounting
For rack mounting using the included rack mounts, do not install the rubber feet. Mount the
SMP111 on a 19inch universal or basic rack shelf.