SMP 111 • Remote Communication and Control 80
Command and Response Tables (continued)
Command
Function
SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
IP Setup Commands
Set date / time E
MM/DD/YY-
HH:MM:SS CT
}
Ipt
•
X4&
] Set the date and time.
View date / time E
CT
} X4&
] View the date and time.
Set time zone
Example:
E X4*
* TZON
}
E
PST * TZON
}
Tzon
•
X4*
*
X4(
]
Tzon
• PST*(UTC-08:00/UTC-07:00)•Pacic Time
]
View time zone
Example:
E
TZON
} X4*
*
X4(
]
PST*(UTC-08:00/UTC-07:00)
•Pacic Time
]
Verbose mode 2/3 response
adds Tzon
• to beginning of
string.
View all time zones E
* TZON
} X4*
*
X4(
]
...
X4*
*
X4(
]]
Repeat for all time zones
Verbose mode 2/3 adds Tzon
•
to beginning of string.
Set DHCP on E
1DH
}
Idh1
] Set DHCP to on.
Set DHCP off E
0DH
}
Idh0
] Set DHCP to off.
View DHCP mode E
DH
} X*
]
0 = DHCP off (Default).
1 = DHCP on.
Set IP address,
subnet mask,
gateway
E
1*
X5)
*
X5!
*
X5)
CISG
}
Cisg1*IP/subnet bits*gateway
]
NOTE: The CISG command resets the network immediately without the need for a BOOT command.
View IP address,
subnet mask,
gateway
E
1CISG
}
Example:
IP/subnet bits*gateway
]
192.168.254.254/16*0.0.0.0
]
Set IP address E X5)
CI
}
Ipi
•
X5)
]
View IP address E
CI
} X5)
]
View hardware MAC
address
E
CH
} X5@
]
Iph
•
X5@
]
View the hardware MAC
address of the unit.
Verbose mode 2/3.
Set subnet mask E X5!
CS
}
Ips
•
X5!
]
View subnet mask
E
CS
} X5!
]
Set gateway IP
address
E X5)
CG
}
Ipg
•
X5)
] Set the gateway IP address.
View gateway IP
address
E
CG
} X5)
] View the gateway IP address.
Set DNS server
IP address
E X5)
DI
}
Ipd
•
X5)
]
Set the DNS server IP address
(Default: 0.0.0.0).
View DNS server
IP address
E
DI
} X5)
] View the DNS server
IPaddress.
Set current port
timeout
E
0
*
X6@
TC
}
Pti 0
*
X6@
]
NOTES:
X*
= On/off 0 = Disabled/unassigned/off/unmuted (Default), 1 = Enabled/assigned/on/muted
X4&
= Local date/time Set: MM/DD/YY‑HH:MM:SS
Read: day of week, date, month, year HH:MM:SS
(for instance; Fri, 21 Jun 2002 10:54:00)
X4*
= Time Zone Acronym (2 to 6 letters) Example: PST for Pacific Standard Time
X4(
= Time zone offset GMT offset value (– 12:00 to 14:00) representing hours and minutes (HH:MM) local time is
offset from GMT time and includes the time zone name.
Example: PST*(UTC-08:00) Pacific Time
X5)
= IP Address Default IP address: 192.168.254.254, Default Gateway: 0.0.0.0, Default DNS: 0.0.0.0
X5!
= Subnet Mask Default: 255.255.0.0
X5@
= Hardware MAC address 00-05-A6-xx-xx-xx
To Next Page
Loading...
Need help?
General