Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·543·
Variables related to general machine parameters.
Values of the variable.
This variable returns one of the following values.
CAN BUS CONFIGURATION.
(V.)MPG.CANMODE
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
CAN bus protocol.
Values of the variable.
This variable returns one of the following values.
(V.)MPG.CANLENGTH
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
CANfagor bus cable length (in meters)
Values of the variable.
This variable returns one of the following values.
SERIAL LINE CONFIGURATION.
(V.)MPG.RSTYPE
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Type of serial line.
Value. Meaning.
0 17 bytes.
1 32 bytes.
V.MPG.CANMODE
Value. Meaning.
0 CANfagor protocol.
1 CANopen protocol.
V.MPG.CANLENGTH
Value. Meaning. Value. Meaning.
0 Up to 20 meters. 7 Up to 90 meters.
1 Up to 30 meters. 8 Up to 100 meters.
2 Up to 40 meters. 9 Up to 110 meters.
3 Up to 50 meters. 10 Up to 120 meters.
4 Up to 60 meters. 11 Up to 130 meters.
5 Up to 70 meters. 12 More than 130 meters.
6 Up to 80 meters.
V.MPG.RSTYPE
To Next Page
Loading...
