·554·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to general machine parameters.
TOOL OFFSET AND WEAR.
(V.)MPG.TOOLOFSG
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Sign criteria for tool offsets and tool wear.
The offsets are used to define the tool dimensions in each axis. The dimensions of the turning
tools are defined using these offsets; either these offsets or tool length and radius may be
used for the dimensions of the rest of the tools.
Values of the variable.
This variable returns one of the following values.
SPINDLE SYNCHRONIZATION.
(V.)MPG.SYNCCANCEL
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Cancel the spindle synchronization.
This parameter indicates whether the CNC cancels spindle synchronization or not after
executing M02, M30 or after an error or reset.
Values of the variable.
This variable returns one of the following values.
DEFINE THE NUMBER OF JOG PANELS AND THEIR
RELATIONSHIP WITH THE CHANNELS.
(V.)MPG.NKEYBD
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of jog panels.
(V.)MPG.KEYBDCH[jog]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel to which the jog panel is assigned.
V.MPG.TOOLOFSG
Value. Meaning.
0Positive.
1 Negative.
V.MPG.SYNCCANCEL
Value. Meaning.
0No.
1Yes.
V.MPG.NKEYBD
To Next Page
Loading...
