KNOWING THE INSTRUMENT PANEL
110
Symbol What it means
amber
AUTOMATIC MAIN BEAM HEADLIGHTS FAILURE
The symbol switches on to report a failure of the automatic main beam headlights.
Contact a Fiat Dealership as soon as possible.
amber
HILL DESCENT CONTROL (where provided)
The symbol appears to indicate that the Hill Holder system has intervened.
amber
DEGRADED ENGINE OIL (where provided)
The symbol is shown on the display (on some versions, together with a dedicated message). The symbol is
displayed for 3 minute cycles and intervals of 5 seconds until oil is changed. The symbol is displayed until the
problem is solved.
WARNING After the first indication, each time the engine is started the symbol will continue to switch on as
described above until the oil is changed. On certain versions a dedicated message is displayed.
If the symbol flashes, this does not mean that there is a fault on the vehicle, rather it simply reports that it is now
necessary to change the oil as a result of regular use of the vehicle. The deterioration of engine oil is accelerated
by using the vehicle for short drives, preventing the engine from reaching operating temperature. Contact a Fiat
Dealership as soon as possible.
22) 23)
amber
SPEED LIMITER FAILURE
The symbol switches on to indicate a Speed Limiter failure.
Contact a Fiat Dealership as soon as possible.
amber
TRAILER LENGTH (“AUTO” SETTING)
The symbol lights up to show the trailer length, set via the "Blind Spot" function in the Setup Menu of the display.
The length can be: 3 metres, or 6 metres, or 9 metres(or 10 ft, 20 ft, 30 ft depending on the selected unit of
measure).
amber
MAXIMUM TRAILER LENGTH
The symbol lights up to indicate the maximum length (greater than 9 metres) of the trailer, set using the "Blind
Spot" function in the Setup Menu of the display.
To Next Page
Loading...
