Fiat Ducato 2021 - Side Lights;Daytime Running Lights

233
SIDE LIGHTS/DAYTIME
RUNNING LIGHTS
To replace the bulb, proceed as
follows:
remove the protective rubber cover
(A) fig. 266;
turn the bulb holder (B) fig. 267
anticlockwise;
extract the bulb by pulling and
replace it;
remove the bulb by pushing it slightly
and turning it anticlockwise (bayonet
mount);
refit the bulb holder B by turning it
clockwise and making sure that it locks
correctly;
refit the protective rubber cover (A)
fig. 266.
267 F1A0386
MAIN BEAM HEADLIGHTS
268 F1A0315
To replace the bulb, proceed as
follows:
remove the protective rubber cover
(C) fig. 266;
free the bulb holder (A) fig. 268 from
the side clips (B) and remove it;
disconnect the electrical connector;
fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight, pressing to engage it with
the side clips;
reconnect the electrical connector;
refit the protective rubber cover (C)
fig. 266.
DIPPED BEAM
HEADLIGHTS
With incandescent bulbs
269 F1A0316
To replace the bulb, proceed as
follows:
remove the protective rubber cover
(B) fig. 266;
free the bulb holder (A) fig. 269 from
the side clips (B) and remove it;
disconnect the electrical connector;
fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight, pressing to engage it with
the side clips;
reconnect the electrical connector;
refit the protective rubber cover (B)
fig. 266.
DIRECTION INDICATORS
To replace the bulb, proceed as
follows: