237
281 F1A0207
Chassis cab versions with
platform
Proceed as follows:
remove the bulb holder on the
rear of the light cluster, turning
through 1/4 turn;
remove the snap-fitted bulb and
replace.
REPLACING
INTERIOR BULBS
For the type of bulb and relevant power
rating, see the “Changing a bulb”
paragraph.
FRONT CEILING LIGHT
To replace the bulbs, proceed as
follows:
282 F1A0745
With the help of a small tool, remove
the transparent part of the ceiling light
(A) fig. 282;
pull the bulb (B) fig. 282 towards you
and replace it;
reposition the lens of the ceiling light
(A) making sure that it is locked into
place.
LED LOAD
COMPARTMENT CEILING
LIGHT
(for versions/markets, where provided)
Contact a Fiat Dealership for replacing
an LED front ceiling light.
REAR CEILING LIGHT
To replace the bulbs, proceed as
follows:
operate in the points shown by the
arrow and remove ceiling light (D)
fig. 283;
open protective flap (E) fig. 284;
change the bulb (F) fig. 284 releasing
it from the side contacts and making
sure the new bulb is correctly fastened
between the contacts;
close the protective flap (E) fig. 284
and re-insert the roof light (D) fig. 283
in its housing, making sure that it locks
into place.
283 F1A0210