KNOWING YOUR VEHICLE
30
EAT&WORK TABLE
(for versions/markets, where provided)
The seat is equipped with a folding
table. To extract the table:
pull the tab (A) fig. 50;
accompany the armrest throughout
its travel until it is horizontal.
The table has a glass holder, a storage
compartment and a shelf that can
rotate (3 positions on each side: 20°,
40°, 60° fig. 52).
50 F1A0726
Table rotation to the right
(passenger side)
Press the (A) fig. 51 button;
push the table with a certain force
indicated by the arrow fig. 51;
the table will rotate to the first of the
intermediate positions fig. 52. Continue
pushing to reach the second position
and then the final position. Each
position will be perceived with stops;
no buttons need to be pressed to
return to the closed position. It will be
sufficient to push in the area indicated
by the arrow fig. 52 to overcome all the
intermediate steps.
51 F1A0727
52 F1A0728
WARNING Never use the table while
the vehicle is moving.
CARGO SPACE
(For versions/markets, where provided)
Depending on the version, you
can request an additional load
compartment fig. 53 located behind the
cab.
53 F1A0041
TRAY UNDER THE SEAT
(for versions/markets, where provided)
Under the driver's seat, there is a tray
(A) fig. 54, which can be easily removed
by sliding it out of the clips on the
support base.
To Next Page
Loading...
