KNOWING YOUR VEHICLE
62
saved and shown on the display
(temperature indicator for air heaters
only).
Press the button to
activate/deactivate the timer. "Activate"
appears on the display.
Then press the control button to
confirm the activation. An activated
preset time is marked with a white bar.
A "T" symbol appears in the main
menu. The quick start button flashes
green if a timer is active for the heating
function.
Activating, deactivating, adjusting
or deleting the timer
Press the control button. Saved
timers are shown on the display. The
timers are placed in chronological order
by day/time. The next active timer is
displayed first. (Fan speed indicator for
air heaters only).
Turn the control button to select the
timer.
Then press the control button to
confirm the selection.
Turn the control button to select
one of the options ("On", "Off", "Fit",
"Delete").
Clear all timers
The "Timer" symbol is selected in the
main menu.
Press the control button. Saved
timers are shown on the display. (Fan
speed indicator for air heaters only)
Turn the control button anticlockwise
until "Clear all" appears in the display.
Then press the control button to
confirm the selection. "OK" will appear
on the display
Then press the control button to
confirm the selection. All programmed
timers have been cleared. The main
menu appears on the display.
Setting the day of the week
The "Settings" menu item has been
selected.
Turn the control button to select the
"Day of the week".
Then press the control button to
confirm the selection.
Turn the control button to select the
required "Day of the week".
Then press the control button to
confirm the selection.
Set time
The "Settings" menu item has been
selected.
Turn the control button to select the
"Time" menu item.
Then press the control button to
confirm the selection.
Turn the control button to select the
desired format (12/24 hours).
Then press the control button to
confirm the selection. The time flashes
on the display.
Turn the control button to select
"Hour".
Then press the control button to
confirm the selection. The "Minute"
time flashes.
The "Minute" time is set as the "Hour"
time.
Language setting
The "Settings" menu item has been
selected.
Turn the control button to select the
"Language" menu item.
Then press the control button to
confirm the selection.
Turn the control button to select the
required language (e.g. "Italian").
Then press the control button to
confirm the selection.
Setting the temperature unit
The "Settings" menu item has been
selected.
Turn the control button to select the
"Temperature unit" menu item.
Press the control button to select the
unit. This setting is acquired without
confirmation.
Brightness setting
The brightness of the monitor is
adapted via the vehicle signal
according to the installation.
To Next Page
Loading...
