Fiat Ducato 2021 - Bodywork Paint Identification Plate; Chassis Marking; Identification Data; Vehicle Identification Number (Vin) Plate

277
IDENTIFICATION
DATA
It is advisable to take note of the
identification codes. Identification
codes are printed and shown on the
plates as indicated below, together
with the positions:
Vehicle identification number (VIN)
plate.
Chassis marking.
Bodywork paint identification plate.
Motor marking.
VEHICLE
IDENTIFICATION
NUMBER (VIN) PLATE
335 F1A0243
This plate is fitted to the engine
compartment front crossmember and
contains the following data fig. 335:
A Name of manufacturer.
B Type-approval number.
C Vehicle type identification code.
D Chassis serial number.
E Maximum permitted weight of
vehicle fully laden.
F Maximum permitted weight of
vehicle fully laden plus trailer.
G Maximum permitted weight on first
axle (front).
H Maximum permitted weight on
second axle (rear).
I Engine type.
L Bodywork version code.
M Spare part number.
N Correct value of smoke coefficient
(for diesel engines)
CHASSIS MARKING
They are located respectively: one
on the passenger side interior wheel
housing (A) fig. 336 , the other on the
lower part of the windscreen fig. 337.
The marking includes:
type of vehicle;
chassis serial number.
336 F1A0244
337 F1A0365
BODYWORK PAINT
IDENTIFICATION PLATE
This plate is fitted to the engine
compartment front crossmember and
contains the following identification
data fig. 338:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Respray and touch up code.