19
display (see “Warning lights and
messages” paragraph in the “Knowing
the instrument panel” section).
DISARMING THE ALARM
To permanently disable the alarm (e.g.
during a long period of inactivity),
simply lock the vehicle by turning the
metal insert of the key with remote
control in the lock.
WARNING If the batteries of the key
with the remote control run out or the
system fails, the alarm can be switched
off by placing the key in the ignition
device and turning it to MAR.
DOORS
DOOR CENTRAL
LOCKING/UNLOCKING
Locking from the outside
With the doors closed, press the
"FIAT"/ button on the key fig. 20,
fig. 21, fig. 22, fig. 23 or insert and turn
the metal insert (A) in the driver's door
lock clockwise. The doors will only be
locked if all doors are shut.
Press button (B) to open/close the
metal insert.
If one or more of the doors is open
after the "FIAT" / button on the
remote control is pressed, the direction
indicators and the LED in the button
(A) fig. 24 will flash quickly for about
3 seconds. With the function on, the
button (A) fig. 24 is disabled.
Double-tapping on the "FIAT" /
button on the remote control activates
the dead lock device (see "Dead lock"
paragraph).
Door unlocking from the outside
Briefly press button fig. 20,
fig. 21 or fig. 23, or fig. 22 (where
provided), according to the version,
to remotely unlock the front doors,
switch on the ceiling lights or, where
provided, in a timed manner and flash
the direction indicators.
Version with 3 sensors
20 F1A0615
Version with 2 sensors
21 F1A0616
(Where provided)
22 F1A0844
To Next Page
Loading...
