Introduction
1.2 General information
A5850-02en Edition 06/2022 13
Information
Disclaimer
Please make sure that every person who is commissioned to work on the gear unit has
read and understood these operating instructions prior to handling the gear unit and ad-
heres to all of the points. Failure to observe these operating instructions can cause product
or property damage or personal injury.
Flender does not accept any liability for damage or operating failures which are due to non-
adherence to these operating instructions.
The gear unit described in these instructions reflects the state of technical development at
the time these operating instructions went to print.
In the interest of technical advancements, Flender reserves the right to make changes to the
individual components and accessories which are considered necessary for improving their
performance and safety, while maintaining their essential features.
Required basic knowledge
In order to understand these operating instructions, you will need to have general knowledge
about gear units. You will also need a basic understanding of the following topics:
• Application planning
• Assembly
• Commissioning
• Maintenance
Documentation landscape
These operating instructions form part of the delivery of your gear unit.
These operating instructions form part of the complete documentation supplied with the gear
unit. The complete documentation encompasses other documents, including:
• Data sheet
• List of equipment
• Dimension drawing
• Operating Instructions 7300 on gear unit lubrication and preservation
• Operating instructions for mounted components
• Instructions for third-party devices
Copyright
The copyright for these operating instructions is held by Flender.
Without the authorisation of Flender, these operating instructions may not be used wholly or
in parts for competitors’ purposes or be given to third parties.
If you have any technical queries, please contact one of our Customer Services addresses
(Page95).
To Next Page
Loading...
