Assembly
5.2 Unpacking the gear unit
50 Edition 06/2022 A5850-02en
If you use a temperature monitoring device, it must be capable of issuing an alarm when the
maximum permissible oil sump temperature is reached. It must also be capable of tripping
the drive when the maximum permissible oil sump temperature is exceeded. The operator's
process might be interrupted when the drive is shut down.
WARNING
Ignition of vapours emitted from solvents.
There is a risk of injury due to ignition of vapours emitted from solvents when carrying out
cleaning work.
Please note the following:
• Ensure adequate ventilation.
• Do not smoke.
5.2 Unpacking the gear unit5.2 Unpacking the gear unit
Introduction
The scope of delivery is listed in the shipping documents.
WARNING
Risk of serious injury due to defective product
A defective gear unit can result in serious injury.
Do not put the gear unit into operation if any damage is visible.
Contact Customer Services (Page95).
Requirement
Check that everything has been delivered immediately upon receipt.
NOTICE
Damage to the gear unit due to corrosion
Exposing the gear unit to moisture can result in damage from corrosion.
Do not damage or open the packaging prematurely if the packaging is designed to pre-
serve the unit.
Procedure
To unpack and use the gear unit, proceed as follows:
1. Remove packaging and transport devices in accordance with regulations.
2. Perform a visual inspection for damage and accumulations of dirt.
3. Immediately report any damaged and/or missing parts to Customer Service (Page95).
4. Dispose of packaging material and transport devices in accordance with regulations.
To Next Page
Loading...
