FLENDER K.SH - Figure 3-14 Fully Assembled Acceleration Sensor (A), and Threaded Connector (B) for Variants 1 to 4; Figure 3-15 Fully Assembled Acceleration Sensor (C), and the Threaded Connector (D) for Variants 5 A and 5 B

Description
3.13 Bearing monitoring
A5850-02en Edition 06/2022 41
The following diagram shows the fully assembled acceleration sensor (A), and the threaded
connector (B) for variants 1 to 4:








0
0

r


$
%
Figure3-14:Fully assembled acceleration sensor (A), and threaded connector (B) for variants 1 to 4
① Shielded cable (oil-proof) ④ Sensitivity specification
② MIL-spec connector ⑤ Set screw
③ Acceleration sensor
The following diagram shows the fully assembled acceleration sensor (C), and the threaded
connector (D) for variants 5A and 5B:



0
0
r
&
'
Figure3-15:Fully assembled acceleration sensor (C), and the threaded connector (D) for variants 5A
and 5B