Introduction
1.2 General information
12 Edition 06/2022 A5850-02en
Qualified personnel
The product/system associated with this documentation may only be used by qualified per-
sonnel trained to perform the relevant tasks, taking into account the associated documenta-
tion for the relevant tasks, particularly the safety information and warnings included therein.
Due to their qualification and experience, qualified personnel are capable of detecting risks
and avoiding potential hazards when dealing with these products/systems.
Intended use of Flender products
Please note the following:
WARNING
Flender products are only suitable for the uses set out in the catalogue and associated
technical documentation. If third-party products and components are used, these must be
recommended and/or authorised by Flender. Safe and flawless operation of the products
requires proper transport, proper storage, setup, assembly, installation, commissioning,
operation and maintenance. The permissible environmental conditions must be adhered
to. Instructions in the associated documentation must be followed.
Trademarks
All designations marked with the trademark symbol ® are registered trademarks of Flender
GmbH. Other designations in this document may be trademarks whose use by third parties
for their own purposes may violate the rights of the owner.
Liability disclaimer
We have assessed the contents of these instructions for compliance with the hardware and
software described. However, deviations cannot be ruled out, so we are unable to accept li-
ability for full compliance. The details in these instructions are regularly reviewed and neces-
sary corrections are contained in subsequent editions.
1.2 General information1.2 General information
Purpose of the operating instructions
These operating instructions describe the gear unit and provide information about handling it
- from assembly to maintenance.
Please keep these operating instructions for later use. Please read these operating instruc-
tions prior to handling the gear unit and follow the information in them.
To Next Page
Loading...
