Fluke 5700A Series II User Manual

Appendices
Fault Codes
A
A-7
2000-Level Faults: Analog Operations Manager Subsystem
2000 Bad Command Code
2001 Bad Signal
2002 Long Term Command In Progress
2003 Guard Crossing Protocol Failed To Start
2004 Fatal Fault, Output Tripped
2005 Tripped While Calibrating or Diagnosing
2100-Level Faults: Output Display Driver Subsystem
2100 Bad Display Selector
2101 Bad Character
2102 Bad Annunciator Selector
2200-Level Faults: Remote Interface Subsystem
2200 Unknown Command
2201 Invalid Number Of Parameters
2202 Invalid Cal Constant Name
2203 Invalid Keyword
2204 Invalid Range
2205 Invalid Parameter Type
2206 Invalid Parameter Unit
2207 Invalid Parameter Value
2208 IEEE488.2 I/O DEADLOCK
2209 Spare
2210 IEEE488.2 INTERRUPTED Query
2211 Not Allowed From GPIB Interface
2212 Not Allowed From Serial Interface
2213 Remote Only
2214 Invalid Syntax
2215 IEEE488.2 UNTERMINATED Command
2216 Symbol Table Overflow
2217 Command Reserved For Service
2218 Invalid Binary Number
2219 Invalid Binary Block
2220 Invalid Character

Fluke 5700A Series II Specifications

General

Type	Multifunction Calibrator
Operating Temperature	0 °C to 50 °C
Storage Temperature	-20 °C to 70 °C
Voltage Range	0 to 1100 V
DC Voltage Range	10 μV to 1100 V
Frequency Range	1 MHz
Humidity	non-condensing
Power Requirements	100 V to 240 V