Chapter 6: Diagnose Copper Test Failures
The HDTDR Analyzer
129
The orange, dashed lines are at the start and end of the
cabling that the tester includes in the test results.
To zoom in and out, use the pinch, reverse-pinch, and double-tap
gestures on the touchscreen. You can also use the zoom controls
to change the magnification on the distance and amplitude scales
independently. See Figure 8 on page 21.
Note
For HDTDR plots for short cables such as patch
cords, the tester does not change the magnification
for the distance (horizontal) scale.
To Next Page
Loading...
