Fluke II Series Getting Started Guide

Troubleshooting Your Instrument
61
Problem
:
• The battery charge state appears erratic or
inconsistent.
• The battery does not hold a normal charge.
Suggestion: Charge the battery pack for at least seven hours.
Problem: The touch-sensitive screen does not respond at all
to input.
Suggestion: Press the On/Off button to place the instrument
in standby mode. Press the On/Off button again to take the
instrument out of this mode.
If the problem continues, press and hold the On/Off button
for six seconds to completely shut down the instrument.
Press the On/Off button again to power the instrument back
on.

Fluke II Series Specifications

General

True RMS	Yes
Temperature	-40 °C to 400 °C
Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600V
Voltage DC	600V
Voltage AC	600V
Current DC	10A
Current AC	10A
Resistance	40MΩ
Battery Life	400 hours
Warranty	3 years