Maintenance and care
101
11.7 Feeder (optional)
11.7.1 Filling with sealing liquid
We recommend using the ‘sealit’ sealing liquid. This special sealing liquid is available
from Francotyp-Postalia.
Warning! Switch off the PostBase mailing system and all components
connected to it prior to topping up sealing liquid.
Warning! Be extremely careful when handling liquids. If you fill the sealant
tank, make sure not to wetten any parts connected to the mains. If this should
happen, immediately pull the power plugs. Have the PostBase mailing
system checked by the Customer Support before using it again.
• Switch off the mailing system.
• Open the flap by pressing the release
button.
To Next Page
Loading...
