Maintenance and care
111
11.8 Sealer (optional)
11.8.1 Cleaning
To remove glue residues the sealer should be cleaned once a month.
• Separate the sealer from the franking
machine:
Slightly lift the franking machine on the left
side and pull the sealer away to the left.
• Swing up the rocker with the moistening
felt.
• Thoroughly rinse absorption and moisten-
ing felts under running water.
• Wipe the housing with a damp cloth.
You can also use a commercially available
liquid soap.
• Fill ‘sealit’ sealing liquid (see page 112).
• Dry the sealer.
• Connect the sealer to the franking
machine.
To Next Page
Loading...
