PostBase Mailing System
70
8 Download postage
To load postage you connect to the data center with your franking machine and call
the desired amount. Billing occurs according to your contract with the postal service.
Refer also to the country-specific addendum (if available) in case there is further
information on the loading process.
If users are enabled, postage download might not be available. In that case, please
contact the system administrator.
Loading postage
• Make sure all settings for communication
with the data center are correct.
• Open the M
ENU.
• Choose D
OWNLOAD POSTAGE.
• Accept the amount to be loaded.
Or
Type the desired amount.
• Confirm the amount displayed with LOAD
POSTAGE and continue.
To load the displayed sum:
• Confirm the security prompt with Y
ES.
PostBase will then establish a connection to
the data center. Loading continues
automatically. Please stand by. Data
exchange may take some time.
The new residual amount is indicated when
loading ends.
• Use R
EPORT to view and print the loading
report.
To Next Page
Loading...
