PostBase Mailing System
112
11.8.2 Checking the liquid level and filling ‘sealit’ sealing liquid
• Check the liquid level in the sealer regu-
larly.
Make sure the sealer is always filled at least
to the ‘min’ mark to prevent the felts from
drying up. When felts with glue residues dry
up they harden to the point of becoming
prematurely useless.
Filling ‘sealit’ sealing liquid
We recommend using the ‘sealit’ sealing
liquid. This special sealing liquid is available
from Francotyp-Postalia.
• Swing the filler hole lid aside.
• Fill the sealer with ‘sealit’ sealing liquid.
• Check the liquid level.
The liquid level in the sealer should roughly
reach to the ‘max’ mark.
• Swing the filler hole lid back on.
• If necessary: dry the sealer outside.
To Next Page
Loading...
