Special functions
75
9.4 Seal Only (optional)
With the special function ‘Seal Only’, you can seal and count letters without printing
(up to 7 mm / 0.3"). This special function is only available on PostBase systems with
feeder. Please heed the mail piece specifications on page 143.
• Open the M
ENU.
•C
HOOSE SPECIAL FUNCTIONS.
•C
HOOSE SEAL ONLY.
• On the feeder, switch on the seal function:
Set the switch to the position seal (see also
chapter 6.3.3.2, page 62).
• Position letter stack on the feeder / start let-
ter transport.
When stack processing with the automatic
feeder for the ‘Seal Only’ special function,
proceed exactly as when franking mail.
For detailed information, please read
chapter 6.3.3.
The ‘Seal Only’ special function has its own
counter. PostBase shows the number of
transported mail pieces on the upper right
side of the display. When quitting the ‘Seal
Only’ function, the counter is reset to ‘0’.
To Next Page
Loading...
