FP PostBase - Setting up the Connection with the Data Center

Advanced settings & system information
83
10.9 Setting up the connection with the data center
Set the respective connection parameters during commissioning. You should verify
and, if necessary, correct the settings if changes were made to your system
configuration.
In case of problems, please contact your network administrator.
• Open the M
ENU.
• Choose M
ANAGE CONNECTION.
PostBase shows the current connection
settings.
Changing the settings
• Press CHANGE.
• Simply follow the instructions on the
display. The PostBase successively
prompts you to specify all necessary
details.
When finished, PostBase displays the
current connection configuration.
• If everything is correct: S
AVE.