FP PostBase - Test Print

The basics of operation
41
4.7 Test print
Using a test print, you can assess the settings for the franking imprint as well as the
print quality.
Test print (example) According to postal regulations, test prints
are marked as such. Never post test imprints.
Setting a test imprint
The way you set the test print may differ from
the approach described here, depending on
requirements by the respective postal
service. In that case, please refer to the
country-specific addendum to the Operator
Manual.
• Set the desired parameters for the franking
imprint (advert, SMS text etc.).
• Press the P
RODUCT button in the Home
screen.
• Set the desired product.
Once all necessary mailing data are set, you
can perform a test print. The TEST PRINT
PRODUCT option is shown at the end of the
additional services list.
• Choose T
EST PRINT PRODUCT.
PostBase prompts you to position a letter.