FP PostBase - Page 42

PostBase Mailing System
42
Printing the test print on an envelope
• Insert an empty envelope (or a postcard) in
the hand feed tray:
– side to be printed face up
– the top edge must touch the letter guide
face.
• Push the envelope in direction of the arrow.
PostBase takes up the envelope, prints the
test print and discharges the envelope to the
right.
Printing the test print on a label (optional)
• Choose L
ABEL to print the test print on a
label.
PostBase prints the test print on a label and
discharges the label to the right.
Positioning an envelope at the feeder
(optional)
• Position an envelope on the feeder:
– side to be printed face up
– the top edge must touch the letter guide
face.
Or
, if an envelope has already been
positioned:
• Choose FEEDER.
PostBase seizes the envelope, prints the test
print and discharges the envelope to the
right.
Letter guide face