Fronius IG Plus 3.0-1 User Manual

99
Setting menu
item ‘CO
2
’
(continued)
The first digit after the decimal
point flashes
7. Use the ‘Up’ and ‘Down’ keys to
select a value for the first digit
after the decimal point
8. Press the ‘Enter’ key
The second digit after the
decimal point flashes
9. Use the ‘Up’ and ‘Down’ keys to
select a value for the second
digit after the decimal point
10. Press the ‘Enter’ key
The set CO
2
reduction factor
flashes
11. Press the ‘Enter’ key
The set CO
2
reduction factor is
now accepted
12. Press the ‘Esc’ key to exit menu
item ‘CO
2
’ or to maintain pre-
vious setting
Setting menu
item ‘YIELD’
1. Select menu item ‘YIELD’
2. Press the ‘Enter’ key
The second digit flashes
5. Use the ‘Up’ and ‘Down’ keys to
select a value for the first digit
6. Press the ‘Enter’ key

Fronius IG Plus 3.0-1 Specifications

General

Protection class	IP 44
Max. output current	13 A
Nominal AC voltage	230 V
THD	< 3%
Max. DC voltage	500 V
Maximum Input Voltage	500 V
Number of MPP Trackers	1
Operating Temperature Range	-20°C to +55°C
Cooling	Convection
Warranty	5 years
AC nominal output	3000 W
Max. apparent AC power	3000 VA
AC voltage range	180 - 264 V