Fronius IG Plus 3.0-1 - Troubleshooting and Maintenance

103
Available data connection
If there is a data connection
available, ‘OKCOM’ is shown.
3. Use the ‘Down’ key to select
available data:
e.g. Reset Personal Display
Card (‘PDCDRST’) ...
... or Reset Interface Card
(‘IFCDRST’)
4. Press the ‘Enter’ key
Setting menu
item ‘DATCOM’
1. Select menu item ‘DATCOM’
2. Press the ‘Enter’ key
The following displays depend
on whether
- a data connection is avai-
lable
- a data connection is faulty
or an option is not installed
The set inverter number now
flashes
7. Press the ‘Enter’ key
The number is accepted
8. Press the ‘Esc’ key to exit menu
item ‘IG-NR’ or to maintain
previous setting
Setting menu
item ‘IG-NR’
(continued)