Fronius IG Plus 3.0-1 User Manual

108
the last saved status message.
4. Press the ‘Esc’ key
The status of the first power
stage set PS00 is shown again
5. Use the ‘Down’ key to select the
second or third power stage set
PS01 or PS02, if available.
The status of the selected
power stage set is shown, e.g.:
RUNPSO1
RUN = active grid feed
6. Press the ‘Enter’ key to display
the last status message saved
Displaying
menu item
‘STATE
PS
(continued)
the last saved status message.
7. Press the ‘Esc’ key 2x to exit
menu item ‘STATEPS’
The display switches between
...
‘STATELAST’
and
1. Select menu item ‘VERSION’
2. Press the ‘Enter’ key
Displaying
menu item
‘VERSION’

Fronius IG Plus 3.0-1 Specifications

General

Protection class	IP 44
Max. output current	13 A
Nominal AC voltage	230 V
THD	< 3%
Max. DC voltage	500 V
Maximum Input Voltage	500 V
Number of MPP Trackers	1
Operating Temperature Range	-20°C to +55°C
Cooling	Convection
Warranty	5 years
AC nominal output	3000 W
Max. apparent AC power	3000 VA
AC voltage range	180 - 264 V