EasyManuals Logo

Fronius IG Plus 3.0-1 User Manual

Fronius IG Plus 3.0-1
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
124
Class 4 Status
Codes
(continued)
439
The MPP master power stage set is switched off because of an error in a
slave power stage set (in the balance mode)
Behavior The Fronius IG Plus stops feeding power into the
grid, the display shows a critical error via a red Ope-
rating Status LED
Remedy If status code persists, contact a Fronius-trained
service technician
442
No phase master for a phase
Behavior The Fronius IG Plus stops feeding power into the
grid, the display shows a critical error via a red Ope-
rating Status LED
Remedy If status code persists, contact a Fronius-trained
service technician
443
Energy transfer not possible
Behavior The Fronius IG Plus stops feeding power into the
grid, the display shows a critical error via a red Ope-
rating Status LED
Remedy If status code persists, contact a Fronius-trained
service technician
445
Invalid power stage set configuration
Behavior The Fronius IG Plus stops feeding power into the
grid, the display shows a critical error via a red Ope-
rating Status LED
Remedy If status code persists, contact a Fronius-trained
service technician
446
Internal communication error with NL-MON PC board
Behavior If it is possible, your Fronius IG Plus unit will resume
the power feeding operation after successfully com-
pleting another attempt to connect
Remedy If status code persists, contact a Fronius-trained
service technician
447
NL-MON PC board stopped grid monitoring
Behavior If it is possible, your Fronius IG Plus unit will resume
the power feeding operation after successfully com-
pleting another attempt to connect
Remedy If status code persists, contact a Fronius-trained
service technician

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fronius IG Plus 3.0-1 and is the answer not in the manual?

Fronius IG Plus 3.0-1 Specifications

General IconGeneral
Protection classIP 44
Max. output current13 A
Nominal AC voltage230 V
THD< 3%
Max. DC voltage500 V
Maximum Input Voltage500 V
Number of MPP Trackers1
Operating Temperature Range-20°C to +55°C
CoolingConvection
Warranty5 years
AC nominal output3000 W
Max. apparent AC power3000 VA
AC voltage range180 - 264 V

Related product manuals