ud_fr_se_sv_01381 012008
III
Maintenance and repair may only be carried out by an authorized specialist.
The use of third-party parts does not guarantee that they were designed and
manufactured according to operational demands and safety requirements.
Use only original spare parts (also applies to standard parts).
Do not carry out any alterations, installations or modifications to the device
without first obtaining the manufacturer’s permission.
Immediately replace any components that are not in perfect condition.
Qualified Person-
nel
(continued)
Safety Precauti-
ons at Equipment
Location
When installing devices with air vents, make sure that cool air can flow freely through the
vents unobstructed. The device should only be operated in accordance with the protec-
tion class listed on the rating plate.
Care must be taken during installation to ensure that there is no electromag-
netic interference with electrical and electronic equipment.
EMC Precautions
Danger of damage to electronic components due to electrostatic discharge.
Take appropriate ESD precautions when replacing and installing compon-
ents.
ESD Precautions
Electrical Installa-
tions
Electrical installations may only be carried out in accordance with relevant
national and local standards and regulations.
The device should only be operated when all safety equipment is fully func-
tional. If safety equipment is not fully functional, there is a danger to:
- the life and well-being of the operator or third parties
- the equipment and other property of the owner/operator
- the efficient operation of the equipment
Safety equipment that is not fully functional must be repaired by an authori-
zed specialist before the device is turned on.
Never bypass or disable safety equipment.
Safety Precauti-
ons in Normal-
Operation
To Next Page
Loading...
Need help?
General
