Fronius TransSteel 5000 Pulse User Manual

bAt | oFF
Welding is not possible
The battery of the OPT Easy Documentation is empty
To reset the service code, press the arrow key - the display shows no |
dAt;
Contact service (to change the battery);
After changing the battery, the date and time in the are displayed in
the 2nd level of the service menu:
see page 91
Cause:
Remedy:
Err | doc
Welding is not possible
Error writing data;
Internal documentation error;
Communication error;
Turn power source off and on again
Cause:
Remedy:
Err | USb
Welding is not possible
Invalid file system on USB thumb drive;
General USB error
Unplug the USB thumb drive
Cause:
Remedy:
USB | full
Welding is not possible
The plugged in USB thumb drive is full
Unplug USB thumb drive, plug in new USB thumb drive
Cause:
Remedy:
117
EN-US

Fronius TransSteel 5000 Pulse Specifications

General

Brand	Fronius
Model	TransSteel 5000 Pulse
Category	Welding System
Language	English