Fronius TransSteel 5000 Pulse User Manual

Setup Menu
General The Setup menu offers easy access to expert knowledge related to the power
source, as well as additional functions. The Setup menu makes it possible to eas-
ily adjust the parameters for various tasks.
Operation Accessing the Setup menu is described with reference to the MIG/MAG standard
synergic welding process.
Access is the same for the other welding processes.
Accessing the Setup menu
MANUAL
STD SYNERGIC
PULSE SYNERGIC
1
Press the "Process" button to select
the "MIG/MAG standard synergic
welding" process
MANUAL
STD SYNERGIC
PULSE SYNERGIC
2T
4T
+
+
2
The control panel is now located in the
Setup menu of the "MIG/MAG stand-
ard synergic welding" process - the last
selected setup parameter is displayed.
Adjusting parameters
1
Select the desired setup parameter us-
ing the left-hand selection dial
Change the setup parameter value us-
ing the right-hand selection dial
Exiting the Setup menu
MANUAL
STD SYNERGIC
PULSE SYNERGIC
2T
4T
+
+
1
95
EN-US

Fronius TransSteel 5000 Pulse Specifications

General

Brand	Fronius
Model	TransSteel 5000 Pulse
Category	Welding System
Language	English